Fecha: Sun, 17 Jun 2012 13:07:46 +0200 [04:07:46 PDT] De: Emile Holanda Para: personal_submersibles@psubs.org Responder-A: personal_submersibles@psubs.org Asunto: RE: [PSUBS-MAILIST] how to fit the acrylic dome ¿Mostrar este HTML en una ventana separada?
Hi Alan,
The T/Di ratio is 27 / 540 = 0,05
Page 486 of the handbook acrylics says that the short time failure depth is 20 MPa = 2000 Meter.
For designing I used a table of the GL which gives a operational depth of 400 Meter.
I am currently building a new sub. (type) Name will be “NordicSub” as the owner of the Eurosub wants to keep that name . ( I am okay with that as the word Euro sounds not so positive here and now…)
This project used the last domes so for more I have to do a new production run. I am now busy with moving to Norway (great coast for psubbing there!) so a new run will be after that.
The turbine bike is a project from already 15 years ago. Great that they still write about it at the other side of the world!!
I really appreciate this wonderful post that you have provided for us. I assure this would be beneficial for most of the people. 10000 mAh Fast Charging Power Bank