concretesubmarine.com/ FORUM

Clear Glass Tile is one of the most used tiles among homeowners and interior designers who will work on a home backsplash, bathroom or swimming pool project. Because clear glass tiles are translucent - you will see through, they've a bright and rich look that opens unlimited possibilities when it comes to design.

Although the definition of clear/translucent glass is "allowing light to pass through partially or diffusely", it doesn't imply that all clear glass tiles are transparent in ways that you will see, as an example, a subject or your hand behind it. Clear glass may be the material used to make these tiles, but they are able to have color or not.

Back colored clear glass mosaic tiles are definitely the most used in the market. The tiles are made of clear/translucent glass usually from 4mm to 8mm thick, and they be given a coating/painting on the trunk during manufacturing, that will be what gives along with to the tile. Usually they are available mesh mounted on a fiberglass sheet or as field tiles such as for instance subway 

Stained clear glass tiles are made of clear/translucent glass which are stained during its manufacturing process and then cut into multiple pieces. In this case, you will see completely through it even if it has a dark stain color, and that is the reason why they are not mesh-backed, otherwise you'd see the mesh through the glass even with installed. Instead, they are mounted on clear-faced or paper-faced sheet.

Plain or non-colored clear glass tiles are made of clear/translucent glass and do not have color in it. Although the word "plain" is employed to explain these types of tiles, they are extremely elegant and easy to utilize if you intend to give a special  clear small glasses "touch" to a home backsplash, bathroom, and shower or swimming pool. Since they don't have any color in it and are totally transparent, they match any color from granite counter tops to kitchen cabinets and easily blend to the environment.

Stained and Plain Clear Glass Tiles require more attention when installing. Because you will see what is on one other side of the tile, you may find yourself seeing the trail produced by the trowel once the installer was butting the wall. Therefore it is recommended to utilize a white adhesive such as for instance mastic and also butter the trunk of the tiles. Be sure to press the tiles firmly from the wall with a grout float and have a look if there is any air bubbles after each and every piece has been placed so you may correct the issue before the adhesive dries. Definitely this type of glass tiles takes more hours to set up but the effect is completely worth.