concretesubmarine.com/ FORUM

Members Login
Username 
 
Password 
    Remember Me  
Mainsite -> concretesubmarine.com/ FORUM -> Concrete Submerged Concepts, floating tubular concrete structures -> 15 ton European-spec Single Girder Gantry Crane for sale to Australia
Post Info TOPIC: 15 ton European-spec Single Girder Gantry Crane for sale to Australia
taitai


Guru

Status: Offline
Posts: 2322
Date:
15 ton European-spec Single Girder Gantry Crane for sale to Australia
Permalink   
 

We have completed 1 single girder gantry crane installation project in Australia, which is a 15 ton European-spec Single Girder Gantry Crane, model MHO, from Qingdao, China to Sydney, Australia. The main beam of the gantry crane is a Welded box-section beam, mainly uses material Q235B carbon structural steel strong and elegant, easy to maintain, Three-layer painting, and the hoisting equipment adopts a low headroom hoist. The performance of the low headroom hoist is: Inverter traveling speed and lifting speed, Reducer, drum, motors, Insultation grade, F Protection class IP54.

European-spec Single Girder Gantry Crane Parameters

  • Lifting capacity: 15T
  • Lifting height: 7M
  • Span: 20M
  • Power supply: 415v 3phase 50hz
  • Pendant control and remote control
  • Working class: FEM2M (ISO M5)

Technical Specifications

Lifting capacityt15
Lifting heightm7
Span20
SpeedCross traveling speedm/min2.0~20 (inverter control)
Crane traveling speed2.0~20 (inverter control)
Lifting speed0.7~4.0 (inverter control)
Working class  /FEM2M (ISO M5)
Power supply  V/Hz/P415V/50HZ/3P
Crane traveling powerKW2.2*2
Trolley traveling power1.1*2
Lifting power13
Total power19.6
Max. wheel loadKN133.8
Total weightt17.7
Ambient temperature/-20℃ ~ +40℃
Anti-collision system/Included
Phase protection relays/Included
Limit switch/Included
Voltage Low Protect device/Included
Emergency stop action/Included
Ground fault protection/Included
Short-circuit protection/Included
Over-heating protection/Included
Power-off protection/Included
Over-current protection/Included
Overload protector/Included
Top Quality Buffer/Included
Country of Origin China

Recommended Rail Specification

TypeTop Width(mm)Bottom Width(mm)Height(mm)Weight(kg/m)
P386811413438.73

European-spec Single Girder Gantry Crane Finished Installation

Lifting hoist & Electrics

Lifting hoist & Electrics

15 ton European-spec Single Girder Gantry Crane

(The above picture is for reference to crane model only)

In addition to the advantages of ordinary single-beam cranes, European-style single-girder cranes adopt low-headroom design in design concept, which can effectively increase the transportation space, and the unique C-shaped structure increases the hoisting space accordingly. In terms of appearance, it is European-style design, light in weight, and can be programmed to lift the limit to achieve comprehensive protection. In terms of performance, it has stable startup and operation, no impact, good mute effect, and reduced noise pollution; and low failure rate, which can reduce maintenance costs and prolong service life. In the system composition, there is a hard tooth surface reducer, which has high bearing capacity and long service life; semi-grease lubrication and high-strength galvanized anti-rust steel wire rope, maintenance-free; and a three-in-one drive of motor, brake and reduction box

15 ton European-spec Single Girder Gantry Crane for sale to Australia



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Mainsite -> concretesubmarine.com/ FORUM -> Concrete Submerged Concepts, floating tubular concrete structures -> 15 ton European-spec Single Girder Gantry Crane for sale to Australia


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard