concretesubmarine.com/ FORUM

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 10 ton and 20 ton Double Girder Overhead Crane with Grab Bucket for sale to Pakistan


Guru

Status: Offline
Posts: 2322
Date:
10 ton and 20 ton Double Girder Overhead Crane with Grab Bucket for sale to Pakistan
Permalink   
 


 We have completed 1 bridge crane installation project in Pakistan, which includes 1 set of 10 ton overhead crane and 1 set of 20 ton overhead crane, all models are QZ double girder Grab Bucket Overhead Crane. All crane components are shipped from Qingdao Port in China to Qasim Port in Pakistan by sea after they are produced in the crane factory in China.

10 ton Double Girder EOT with Grab Bucket parameters

  • Lifting capacity: 10T
  • Lifting height: 15M
  • Span: 23M
  • 5m³Grab Bucket
  • Working class: ISO M7
  • Power supply: 415v, 3phase, 50hz
  • Cabin control

20 ton Double Girder EOT with Grab Bucket parameters

  • Lifting capacity: 20T
  • Lifting height: 16M
  • Span: 23M
  • 5m³Grab Bucket
  • Working class: ISO M7
  • Power supply: 415v, 3phase, 50hz
  • Cabin controlOverhead Crane Finished InstallationThe double girder grab overhead crane fetching device is a grab bucket that can grab bulk materials. The double girder grab bridge crane has an opening and closing mechanism and a hoisting mechanism, and the grab is suspended on the opening and closing mechanism and the hoisting mechanism with four wire ropes respectively. The opening and closing mechanism drives the grab bucket to close and grab the material. When the bucket mouth is closed, the hoisting mechanism is started immediately, so that the four steel wire ropes are evenly loaded for hoisting work. When unloading, only the opening and closing mechanism is activated, and the bucket mouth is opened immediately to tilt the material. Except for the different lifting mechanism, the rest of the structure of the grab bridge crane is basically the same as that of the hook bridge crane.

Application of double girder grab bridge crane:

1. Double-girder grab bridge cranes are widely used in power plants, freight yards, workshops, docks, coal stations, etc. for the loading and unloading of bulk materials.

2. Double-girder grab cranes are strictly prohibited to be used in flammable and explosive environments. If there are special needs for use, non-standard design can be customized.

3. All mechanisms of the grab bridge crane are operated in the cab, and the directions for entering the platform door of the cab are: end entry, side entry and top entry.

4. The grapple crane is equipped with a grab bucket, and the style and model specification of the grab bucket can be selected according to the needs of use.

5. The opening direction of the grab is parallel and vertical. The grabbing device is a four-rope grab with double drums, which is simple in structure and reliable in operation. The grab can be opened and closed at any height. When the grabbing material particles are less than 100mm, the effect is good and the production efficiency is high. When the grabbed particles are 200mm large, a toothed grab is required.

Technical Standards

— FEM 9.511    Mechanical group

— FEM 9.661    Hoisting and traveling components size and quality standard

— FEM 9.671    Wire rope quality standard

— FEM 9.681    Travel motor choice

— FEM 9.682    Hoisting motor choice

— FEM 9.755    Electric hoisting equipment

— FEM 9.811    Electric crane standard

— FEM 9.901    Hoisting components design reference

— IEC 34-1      Traveling and allocation performance

— IEC 34-5      Protection grade standard

— IEC 947-5-1   Low voltage equipment

China Main National Standards

Design rules for cranes GB/T 3811-2008

Safety rules for lifting appliances GB 6067-2010

Common crane technical condition GB 7592-87

Crane-Overhead travelling crane and portal bridge crane

tolerances for manufacture and tracks laying GB/T 10183-2010

Crane-test code and procedures GB/T 5905-2011

General Bridge crane GB/T 14405-2011

Portal Crane GB/T 14406-2011

Crane & Lift Equipment Technical Performance and Acceptance Condition GB/T 17908-1999

Electrical installation and acceptation standard GBJ 232-82

Safety of Machinery – Electrical Equipment of Machines

Part 32: Requirements for hoisting machines GB 5226.2-2002

Electrical installation and acceptance standard GB 50256-96

The Others 20 ton Overhead Crane case in Pakistan

How to customize Overhead Crane in Pakistan

We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a Overhead Crane, you can leave a message on the website or email, tell us the following information, and our sales manager will contact you:

  • Lifting capacity (ton): __ ?( The rated capacity)
  • Lifting height (m):__ ? (Height from hook center to the floor)
  • Span (m): __ ? (Distance between rail center)
  • Lifting speed (m/min): __ ? ( Single, Dual, Variable)
  • Traveling distance (m): __ ? (The length of the rail)
  • Work duty: __ ? (How many hours a day? How many times an hour?)
  • What material to be lifted: __ ?
  • Industrial voltage: __ ? ( like :380V, 50Hz, 3ph )


__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard